DÔLEŽITÉ OZNÁMENIE O ZMENE PRÁVNEHO SUBJEKTU

1. apríla meníme právnu subjektivitu na RS Components GmbH, nové číslo VAT , ako aj bankové údaje.

Kliknutím sem získate všetky potrebné informácie.

Transformátor osvětlení 20 → 60W, primární napětí: 220 → 240V, sekundární napětí: 12V

Skladové číslo RS: 811-7140Značka: GEČíslo dielu výrobcu: 94386
brand-logo
View all in Transformátory osvětlení

Technické dokumenty

Špecifikácie

Brand

GE

Jmenovité primární napětí

220 → 240V

Jmenovité sekundární napětí

12V

Jmenovitý výkon

20 → 60W

Abmessungen

103,5 x 40 x 20,5 mm

Délka

109 mm

Šířka

40 mm

Hloubka

20.5 mm

Počet fází

1

Typ zakončení

Screw

Krajina pôvodu

China

Podrobnosti o výrobku

GE osvětlení 12 v stmívatelný elektronický transformátor

Tento elektronický transformátor 12 v je dodáván ve zcela novém kompaktním provedení, díky kterému je ideální volbou pro jemné osvětlení. Ideální aplikace pro tento GE elektronický transformátor jsou v kancelářích, nemocnicích, obchodech, hotelech, supermarketech, letiště, podchody a železniční stanice.

Konektor Terminal pro zkrácení doby realizace operace
Vysoká účinnost, vysoká spolehlivost
Vysoký účiník, nízká hodnota THD
Průměrná životnost 20,000 hodin

Approvals

CE, CB
Harmonic: IEC 61000-3-2
EMC: IEC 61547
EMI: CISPR15
Safety: IEC 61347-1, IEC 61347-2-3

Low Voltage Lighting Transformers

Dimming Methods (where applicable):
Leading Edge:
The control device is either a thyristor or triac which blocks power until they are switched on by the control signal. At that point the current flows almost instantaneously and continues to flow until the end of the half cycle of the mains waveform. When the signal reaches zero, the device turns off and no more current is passed until it is triggered again. Turning the power on and off in this manner averages out creating a constant intensity level and by altering the precise trigger point over a period of time the lamp can be dimmed.

Trailing Edge:
Since this method of dimming uses transistor technology it is not limited to just switching, therefore current can be controlled gradually. Transistors can be programmed to pass current at the start of each half cycle, and gradually switch off later. This will control the full amount of power reaching the lamp without the side effects of a step increase in current.

Informácie o zásobách sú dočasne nedostupné.

Skúste to znovu neskôr.

Informácie o zásobách sú dočasne nedostupné.

P.O.A.

Transformátor osvětlení 20 → 60W, primární napětí: 220 → 240V, sekundární napětí: 12V

P.O.A.

Transformátor osvětlení 20 → 60W, primární napětí: 220 → 240V, sekundární napětí: 12V
Informácie o zásobách sú dočasne nedostupné.

Technické dokumenty

Špecifikácie

Brand

GE

Jmenovité primární napětí

220 → 240V

Jmenovité sekundární napětí

12V

Jmenovitý výkon

20 → 60W

Abmessungen

103,5 x 40 x 20,5 mm

Délka

109 mm

Šířka

40 mm

Hloubka

20.5 mm

Počet fází

1

Typ zakončení

Screw

Krajina pôvodu

China

Podrobnosti o výrobku

GE osvětlení 12 v stmívatelný elektronický transformátor

Tento elektronický transformátor 12 v je dodáván ve zcela novém kompaktním provedení, díky kterému je ideální volbou pro jemné osvětlení. Ideální aplikace pro tento GE elektronický transformátor jsou v kancelářích, nemocnicích, obchodech, hotelech, supermarketech, letiště, podchody a železniční stanice.

Konektor Terminal pro zkrácení doby realizace operace
Vysoká účinnost, vysoká spolehlivost
Vysoký účiník, nízká hodnota THD
Průměrná životnost 20,000 hodin

Approvals

CE, CB
Harmonic: IEC 61000-3-2
EMC: IEC 61547
EMI: CISPR15
Safety: IEC 61347-1, IEC 61347-2-3

Low Voltage Lighting Transformers

Dimming Methods (where applicable):
Leading Edge:
The control device is either a thyristor or triac which blocks power until they are switched on by the control signal. At that point the current flows almost instantaneously and continues to flow until the end of the half cycle of the mains waveform. When the signal reaches zero, the device turns off and no more current is passed until it is triggered again. Turning the power on and off in this manner averages out creating a constant intensity level and by altering the precise trigger point over a period of time the lamp can be dimmed.

Trailing Edge:
Since this method of dimming uses transistor technology it is not limited to just switching, therefore current can be controlled gradually. Transistors can be programmed to pass current at the start of each half cycle, and gradually switch off later. This will control the full amount of power reaching the lamp without the side effects of a step increase in current.