Technické dokumenty
Špecifikácie
Brand
ITT CannonTyp
Konektor Trident
Nanesené lepidlo
No
Materiál
Plastic
Barva
Black
Splněné normy
UL 94V-0
Řada
Trident Neptune
Podrobnosti o výrobku
Zadní skříň
K dispozici ve verzích se smršťováním tepla nebo se závitem pro použití s plastovou ohebnou elektroinstalační trubkou. Lze namontovat na místo upevňovací matice těsnění na příslušných zátkách a objímkách.
Neptune
Based on Trident Ringlok series, the Neptune range combines power and signal contacts. Widely used in automotive, marine and process control industries, they feature a strong bayonet coupling system with standard and reversed pin/socket combinations. A wide selection of backshell accessories, rear housings and dust caps are available.,To maintain IP67 rating the rear of the connectors have a rubber seal which is pierced upon contact insertion. The seal is held in place by a screw ring (as supplied) which may be replaced with the appropriate size backshell. For IP67 rating to be maintained, wire insulation diameters should be within the following diameters: Signal wires: 1.7 to 2.7mm, Power wires : 2.7 to 4.0mm.,Number of contacts shown as power/signal eg 2//13.
Informácie o zásobách sú dočasne nedostupné.
Skúste to znovu neskôr.
€ 5,09
€ 5,09 Each (bez DPH)
1
€ 5,09
€ 5,09 Each (bez DPH)
1
Kúpiť hromadne
množstvo | Jednotková cena |
---|---|
1 - 19 | € 5,09 |
20 - 39 | € 4,55 |
40+ | € 4,10 |
Technické dokumenty
Špecifikácie
Brand
ITT CannonTyp
Konektor Trident
Nanesené lepidlo
No
Materiál
Plastic
Barva
Black
Splněné normy
UL 94V-0
Řada
Trident Neptune
Podrobnosti o výrobku
Zadní skříň
K dispozici ve verzích se smršťováním tepla nebo se závitem pro použití s plastovou ohebnou elektroinstalační trubkou. Lze namontovat na místo upevňovací matice těsnění na příslušných zátkách a objímkách.
Neptune
Based on Trident Ringlok series, the Neptune range combines power and signal contacts. Widely used in automotive, marine and process control industries, they feature a strong bayonet coupling system with standard and reversed pin/socket combinations. A wide selection of backshell accessories, rear housings and dust caps are available.,To maintain IP67 rating the rear of the connectors have a rubber seal which is pierced upon contact insertion. The seal is held in place by a screw ring (as supplied) which may be replaced with the appropriate size backshell. For IP67 rating to be maintained, wire insulation diameters should be within the following diameters: Signal wires: 1.7 to 2.7mm, Power wires : 2.7 to 4.0mm.,Number of contacts shown as power/signal eg 2//13.