Kovový plášť pro kulaté konektory ITT Cannon
Technické dokumenty
Špecifikácie
Podrobnosti o výrobku
Zadní skříň
K dispozici ve verzích se smršťováním tepla nebo se závitem pro použití s plastovou ohebnou elektroinstalační trubkou. Lze namontovat na místo upevňovací matice těsnění na příslušných zátkách a objímkách.
Neptune
Based on Trident Ringlok series, the Neptune range combines power and signal contacts. Widely used in automotive, marine and process control industries, they feature a strong bayonet coupling system with standard and reversed pin/socket combinations. A wide selection of backshell accessories, rear housings and dust caps are available.,To maintain IP67 rating the rear of the connectors have a rubber seal which is pierced upon contact insertion. The seal is held in place by a screw ring (as supplied) which may be replaced with the appropriate size backshell. For IP67 rating to be maintained, wire insulation diameters should be within the following diameters: Signal wires: 1.7 to 2.7mm, Power wires : 2.7 to 4.0mm.,Number of contacts shown as power/signal eg 2//13.
€ 10,27
€ 10,27 Each (bez DPH)
1
€ 10,27
€ 10,27 Each (bez DPH)
1
Informácie o zásobách sú dočasne nedostupné.
Skúste to znovu neskôr.
| množstvo | Jednotková cena |
|---|---|
| 1 - 19 | € 10,27 |
| 20 - 39 | € 9,27 |
| 40+ | € 8,32 |
Technické dokumenty
Špecifikácie
Podrobnosti o výrobku
Zadní skříň
K dispozici ve verzích se smršťováním tepla nebo se závitem pro použití s plastovou ohebnou elektroinstalační trubkou. Lze namontovat na místo upevňovací matice těsnění na příslušných zátkách a objímkách.
Neptune
Based on Trident Ringlok series, the Neptune range combines power and signal contacts. Widely used in automotive, marine and process control industries, they feature a strong bayonet coupling system with standard and reversed pin/socket combinations. A wide selection of backshell accessories, rear housings and dust caps are available.,To maintain IP67 rating the rear of the connectors have a rubber seal which is pierced upon contact insertion. The seal is held in place by a screw ring (as supplied) which may be replaced with the appropriate size backshell. For IP67 rating to be maintained, wire insulation diameters should be within the following diameters: Signal wires: 1.7 to 2.7mm, Power wires : 2.7 to 4.0mm.,Number of contacts shown as power/signal eg 2//13.