Elektromagnetický ventil 134146 3portový NC 230 V AC, M5 Burkert

6012 Řada 3//2, miniaturní elektromagnetické ventily běžně uzavřené - Připojení portu se závitem

Coil se snadno mění s ventilem
Coil lze podle potřeby zablokovat v jedné ze čtyř poloh 90° nebo pohybovat volně
Mosazné tělo, Coil polya
Vhodné pro stlačený vzduch, vodu a hydraulický olej
Provozní teplota - max. 10 až +100 °C.
Spotřeba energie 4W DC; 9VA (Inspěch); 6VA (držení)
Ochrana podle IP65 pomocí kabelové zástrčky DIN43650C.

3 Way Inert Gases and Fluid Valves

Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left hand side of the diagram describes the valves operation when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and this is described on the right hand side of the diagram, see the typical schematic diagram below.,The 3//2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2//2-way valves as two-way.,The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications will indicate the appropriate connections and pressure capabilities should an alternative circuit function be required.