Technické dokumenty
Špecifikácie
Brand
PR ElectronicsTyp modulu
Programovatelný vysílač
Typ vstupního signálu
Current, RTD, Thermocouple, Voltage
Typ výstupního signálu
Proud, Napětí, Relé
Napájecí napětí
19.2 → 300 V dc, 21.6 → 253V ac
Certifikace pro nebezpečné prostory
ATEX
Rozsah pracovních teplot
-20 → +60°C
Řada
5100
Počet kanálů
1
Betriebstemperatur min.
-20°C
Betriebstemperatur max.
+60°C
Krajina pôvodu
Denmark
Podrobnosti o výrobku
PR Electronics 5116B Ex Programmable Transmitter
PR Electronics 5116B programmable transmitter for linearizing electronic temperature measurement. With a wide variety of configurable inputs for current/voltage or temperature and conversion of linear resistance the 5116 transmitters are suitable for a wide range of temperature measurement applications.
The 5116B transmitter can be configured, with or without a power supply, using the PReset software and the Loop Link communications unit (RS stock number 796-7020).
The 5116B signal conditioner is based on a microprocessor core with an efficient program operation. The basic calibration data and present set-up are stored in an EEPROM thereby avoiding the loss or change of data at power off.
PR Electronics - Ex Interfaces
Informácie o zásobách sú dočasne nedostupné.
Skúste to znovu neskôr.
€ 498,30
Each (bez DPH)
1
€ 498,30
Each (bez DPH)
1
Technické dokumenty
Špecifikácie
Brand
PR ElectronicsTyp modulu
Programovatelný vysílač
Typ vstupního signálu
Current, RTD, Thermocouple, Voltage
Typ výstupního signálu
Proud, Napětí, Relé
Napájecí napětí
19.2 → 300 V dc, 21.6 → 253V ac
Certifikace pro nebezpečné prostory
ATEX
Rozsah pracovních teplot
-20 → +60°C
Řada
5100
Počet kanálů
1
Betriebstemperatur min.
-20°C
Betriebstemperatur max.
+60°C
Krajina pôvodu
Denmark
Podrobnosti o výrobku
PR Electronics 5116B Ex Programmable Transmitter
PR Electronics 5116B programmable transmitter for linearizing electronic temperature measurement. With a wide variety of configurable inputs for current/voltage or temperature and conversion of linear resistance the 5116 transmitters are suitable for a wide range of temperature measurement applications.
The 5116B transmitter can be configured, with or without a power supply, using the PReset software and the Loop Link communications unit (RS stock number 796-7020).
The 5116B signal conditioner is based on a microprocessor core with an efficient program operation. The basic calibration data and present set-up are stored in an EEPROM thereby avoiding the loss or change of data at power off.