Aktuálne dodacie lehoty

Od 1. apríla 2025 vaše objednávky doručuje spoločnosť GLS. Všetky zásielky sa teraz budú doručovať cestnou dopravou. Väčšina objednávok bude doručená do 72 hodín.

Podrobné informácie

Elektromagnetický ventil 3portový NC 230 V ac, 1/4in Asco Joucomatic

Skladové číslo RS: 458-0386Značka: Asco JoucomaticČíslo dielu výrobcu: SC E374A017 MS 230V 50 HZ
brand-logo

Technické dokumenty

Špecifikácie

Napájecí napětí

230 V ac

Počet portů

3

Velikost připojení

1/4in

Připojení

1/4" G vnitřní

Obsluha

Direct

Výchozí poloha ventilu

NC

Vhodné využití

Vzduch, neutrální plyn, ropa, voda

Typ

3/2

Průměr vstupního otvoru

2.7mm

Gehäusematerial

Brass

Řada

374

Maximální pracovní tlak

10 bar

Rozsah pracovních teplot

-25 → +60 °C

Pohlaví konektoru

Female

Maximální provozní teplota

+60°C

Betriebstemperatur min.

-25°C

Standard závitu nebo typ přípojky

G

Součinitel proudění Kv

0.22m³/h

Maximální doba otevření

20ms

Maximální doba uzavření

20ms

Krajina pôvodu

France

Podrobnosti o výrobku

elektromagnetické ventily řady 374 s přímým ovládáním 3//2

Elektromagnetické ventily přímého řízení NC řady 374 3/2.
Kompaktní a lehký pro snadnou instalaci.
Žádný minimální ovládací tlak.
K dispozici s mosazným nebo nerezovým tělem.
Zásuvné konektory.
Další Coil lze objednat samostatně (24 v stř.: 656-3232, 230 v stř.: 656-3226, 24 v ss.: 656-3383).

3 Way Inert Gases and Fluid Valves

Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left hand side of the diagram describes the valves operation when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and this is described on the right hand side of the diagram, see the typical schematic diagram below.,The 3//2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2//2-way valves as two-way.,The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications will indicate the appropriate connections and pressure capabilities should an alternative circuit function be required.

Informácie o zásobách sú dočasne nedostupné.

P.O.A.

Elektromagnetický ventil 3portový NC 230 V ac, 1/4in Asco Joucomatic

P.O.A.

Elektromagnetický ventil 3portový NC 230 V ac, 1/4in Asco Joucomatic
Informácie o zásobách sú dočasne nedostupné.

Informácie o zásobách sú dočasne nedostupné.

Skúste to znovu neskôr.

Technické dokumenty

Špecifikácie

Napájecí napětí

230 V ac

Počet portů

3

Velikost připojení

1/4in

Připojení

1/4" G vnitřní

Obsluha

Direct

Výchozí poloha ventilu

NC

Vhodné využití

Vzduch, neutrální plyn, ropa, voda

Typ

3/2

Průměr vstupního otvoru

2.7mm

Gehäusematerial

Brass

Řada

374

Maximální pracovní tlak

10 bar

Rozsah pracovních teplot

-25 → +60 °C

Pohlaví konektoru

Female

Maximální provozní teplota

+60°C

Betriebstemperatur min.

-25°C

Standard závitu nebo typ přípojky

G

Součinitel proudění Kv

0.22m³/h

Maximální doba otevření

20ms

Maximální doba uzavření

20ms

Krajina pôvodu

France

Podrobnosti o výrobku

elektromagnetické ventily řady 374 s přímým ovládáním 3//2

Elektromagnetické ventily přímého řízení NC řady 374 3/2.
Kompaktní a lehký pro snadnou instalaci.
Žádný minimální ovládací tlak.
K dispozici s mosazným nebo nerezovým tělem.
Zásuvné konektory.
Další Coil lze objednat samostatně (24 v stř.: 656-3232, 230 v stř.: 656-3226, 24 v ss.: 656-3383).

3 Way Inert Gases and Fluid Valves

Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left hand side of the diagram describes the valves operation when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and this is described on the right hand side of the diagram, see the typical schematic diagram below.,The 3//2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2//2-way valves as two-way.,The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications will indicate the appropriate connections and pressure capabilities should an alternative circuit function be required.