Technické dokumenty
Špecifikácie
Typ řadiče
Detector
Typ snímače
Kadmium sulfid
Betriebsspannung
220 až 270 V.
Typ montáže
Vzdálený
Délka
57 mm
Šířka
31 mm
Höhe
25mm
Výkon
600 mW
Krajina pôvodu
United Kingdom
Podrobnosti o výrobku
Dvoudílný regulátor svítivosti
Vzdálený detektor IP65
Interní řadič pro montáž
Detektor má přírubu o průměru 27 mm, hloubku 25 mm a závit 20 mm
Supplied with
2 nitrile gaskets
Daylight Lighting Controllers
These controllers automatically turn lights 'ON' and 'OFF' in response to changes in ambient light levels, primarily the transition from day to night and vice-versa. The more advanced types (see note below) have inbuilt logic to minimise false triggering, whereas the remainder have inbuilt time delays or higher 'OFF' thresholds, to prevent on/off cycling. As a general rule, these controllers should be sited such that they are not illuminated, by the light they are controlling. Nominal supply voltage is 230Vac.,Note regarding energy-saving negative-hysteresis controllers,Where figures for the 'OFF' threshold are lower than for the 'ON' threshold, the sensor is designed such that four thresholds are actually monitored. These are: dusk, the middle of the night, dawn and the middle of the day. Monitoring at times other than dusk and dawn enables the sensor to determine what it should be looking for next, minimising false triggering and improving overall controller operation.
Informácie o zásobách sú dočasne nedostupné.
Skúste to znovu neskôr.
€ 22,32
Each (bez DPH)
1
€ 22,32
Each (bez DPH)
1
Technické dokumenty
Špecifikácie
Typ řadiče
Detector
Typ snímače
Kadmium sulfid
Betriebsspannung
220 až 270 V.
Typ montáže
Vzdálený
Délka
57 mm
Šířka
31 mm
Höhe
25mm
Výkon
600 mW
Krajina pôvodu
United Kingdom
Podrobnosti o výrobku
Dvoudílný regulátor svítivosti
Vzdálený detektor IP65
Interní řadič pro montáž
Detektor má přírubu o průměru 27 mm, hloubku 25 mm a závit 20 mm
Supplied with
2 nitrile gaskets
Daylight Lighting Controllers
These controllers automatically turn lights 'ON' and 'OFF' in response to changes in ambient light levels, primarily the transition from day to night and vice-versa. The more advanced types (see note below) have inbuilt logic to minimise false triggering, whereas the remainder have inbuilt time delays or higher 'OFF' thresholds, to prevent on/off cycling. As a general rule, these controllers should be sited such that they are not illuminated, by the light they are controlling. Nominal supply voltage is 230Vac.,Note regarding energy-saving negative-hysteresis controllers,Where figures for the 'OFF' threshold are lower than for the 'ON' threshold, the sensor is designed such that four thresholds are actually monitored. These are: dusk, the middle of the night, dawn and the middle of the day. Monitoring at times other than dusk and dawn enables the sensor to determine what it should be looking for next, minimising false triggering and improving overall controller operation.