Hlava tlačítka, řada: ComEx Černá
Technické dokumenty
Špecifikácie
Brand
BartecŘada
ComEx
Průměr výřezu
22mm
Barva tlačítka
Black
Typ tlačítka
Round
Materiál tlačítka
Plastic
Stupeň krytí IP
IP66, IP67
Průměr tlačítka
40mm
Certifikace pro nebezpečné prostory
ATEX
Typ svorky
Screw
Betriebstemperatur min.
-55°C
Maximální provozní teplota
+70°C
Krajina pôvodu
Germany
Podrobnosti o výrobku
Zapněte pohony spínače
Hazardous Area Actuators & Contact Blocks
Panel mounting, with a wide range of switch contact arrangements and elements including; selector switches, key switches, standard pushbuttons and an emergency stop pushbutton. The actuators and lens units require a 30.5mm mounting hole. Ingress protection is to IP66 and they are component-approved in their own right. Switch and lamp modules include three metres of encapsulated cable. Switch modules include a wipe clean action and are rated up to 230Vac/16A (circuit type AC-12). The N/C contact has a positive break action.,The electronic circuitry of each lamp module self configures to allow the lamps to be used over a wide range of ac and dc voltages.,A simple cam arrangement on the modules provides a rapid method for the fitting of the actuators.
€ 64,75
€ 64,75 Each (bez DPH)
1
€ 64,75
€ 64,75 Each (bez DPH)
1
Informácie o zásobách sú dočasne nedostupné.
Skúste to znovu neskôr.
| množstvo | Jednotková cena |
|---|---|
| 1 - 5 | € 64,75 |
| 6 - 11 | € 62,09 |
| 12+ | € 60,09 |
Technické dokumenty
Špecifikácie
Brand
BartecŘada
ComEx
Průměr výřezu
22mm
Barva tlačítka
Black
Typ tlačítka
Round
Materiál tlačítka
Plastic
Stupeň krytí IP
IP66, IP67
Průměr tlačítka
40mm
Certifikace pro nebezpečné prostory
ATEX
Typ svorky
Screw
Betriebstemperatur min.
-55°C
Maximální provozní teplota
+70°C
Krajina pôvodu
Germany
Podrobnosti o výrobku
Zapněte pohony spínače
Hazardous Area Actuators & Contact Blocks
Panel mounting, with a wide range of switch contact arrangements and elements including; selector switches, key switches, standard pushbuttons and an emergency stop pushbutton. The actuators and lens units require a 30.5mm mounting hole. Ingress protection is to IP66 and they are component-approved in their own right. Switch and lamp modules include three metres of encapsulated cable. Switch modules include a wipe clean action and are rated up to 230Vac/16A (circuit type AC-12). The N/C contact has a positive break action.,The electronic circuitry of each lamp module self configures to allow the lamps to be used over a wide range of ac and dc voltages.,A simple cam arrangement on the modules provides a rapid method for the fitting of the actuators.