Popisovací štítek, pro použití s: Bartec Push Buttons Bartec
Technické dokumenty
Špecifikácie
Podrobnosti o výrobku
Držák štítků
Pro letáky s pokyny pro obsluhu
Hazardous Area Actuators & Contact Blocks
Panel mounting, with a wide range of switch contact arrangements and elements including; selector switches, key switches, standard pushbuttons and an emergency stop pushbutton. The actuators and lens units require a 30.5mm mounting hole. Ingress protection is to IP66 and they are component-approved in their own right. Switch and lamp modules include three metres of encapsulated cable. Switch modules include a wipe clean action and are rated up to 230Vac/16A (circuit type AC-12). The N/C contact has a positive break action.,The electronic circuitry of each lamp module self configures to allow the lamps to be used over a wide range of ac and dc voltages.,A simple cam arrangement on the modules provides a rapid method for the fitting of the actuators.
Informácie o zásobách sú dočasne nedostupné.
Skúste to znovu neskôr.
€ 4,95
Each (bez DPH)
1
€ 4,95
Each (bez DPH)
1
Kúpiť hromadne
| množstvo | Jednotková cena |
|---|---|
| 1 - 5 | € 4,95 |
| 6 - 11 | € 4,71 |
| 12+ | € 4,58 |
Technické dokumenty
Špecifikácie
Podrobnosti o výrobku
Držák štítků
Pro letáky s pokyny pro obsluhu
Hazardous Area Actuators & Contact Blocks
Panel mounting, with a wide range of switch contact arrangements and elements including; selector switches, key switches, standard pushbuttons and an emergency stop pushbutton. The actuators and lens units require a 30.5mm mounting hole. Ingress protection is to IP66 and they are component-approved in their own right. Switch and lamp modules include three metres of encapsulated cable. Switch modules include a wipe clean action and are rated up to 230Vac/16A (circuit type AC-12). The N/C contact has a positive break action.,The electronic circuitry of each lamp module self configures to allow the lamps to be used over a wide range of ac and dc voltages.,A simple cam arrangement on the modules provides a rapid method for the fitting of the actuators.