DÔLEŽITÉ OZNÁMENIE O ZMENE PRÁVNEHO SUBJEKTU

1. apríla meníme právnu subjektivitu na RS Components GmbH, nové číslo VAT , ako aj bankové údaje.

Kliknutím sem získate všetky potrebné informácie.

Držák pojistek s montáží do panelu, 20A, 6.3 x 32mm, 250V ac, Bulgin

Skladové číslo RS: 236-5731Značka: BulginČíslo dielu výrobcu: FX0417
brand-logo
View all in Držáky pojistek

Technické dokumenty

Špecifikácie

Brand

Bulgin

Velikost pojistky

6.3 x 32mm

Strom

20A

Jmenovité napětí

250V ac

Kategorie ochrany

PC2

Materiál kontaktu

Silver Plated Brass

Řada

FX0417

Styl krytky

Slotted

Krajina pôvodu

Tunisia

Podrobnosti o výrobku

Panel Mounting

CATEGORIES OF PROTECTION AGAINST ELECTRIC SHOCK,PC1: No integral protection against electric shock. If required, designers must provide additional protection against electric shock on equipment.,PC2: With integral protection against electric shock. Fuse-holders shall have live parts inaccessible to IEC529 standard test finger, when fully assembled, without fuse carrier or fuse in place and when fuse carrier, with fuse is being inserted or withdrawn.,PC3: With integral protection against electric shock. Fuse-holders shall have live parts inaccessible to IEC529 1mm diameter rigid test wire when fully assembled, without fuse carrier or fuse in place and when fuse carrier, with fuse is being inserted or withdrawn.

Informácie o zásobách sú dočasne nedostupné.

Skúste to znovu neskôr.

Informácie o zásobách sú dočasne nedostupné.

P.O.A.

Držák pojistek s montáží do panelu, 20A, 6.3 x 32mm, 250V ac, Bulgin

P.O.A.

Držák pojistek s montáží do panelu, 20A, 6.3 x 32mm, 250V ac, Bulgin
Informácie o zásobách sú dočasne nedostupné.

Technické dokumenty

Špecifikácie

Brand

Bulgin

Velikost pojistky

6.3 x 32mm

Strom

20A

Jmenovité napětí

250V ac

Kategorie ochrany

PC2

Materiál kontaktu

Silver Plated Brass

Řada

FX0417

Styl krytky

Slotted

Krajina pôvodu

Tunisia

Podrobnosti o výrobku

Panel Mounting

CATEGORIES OF PROTECTION AGAINST ELECTRIC SHOCK,PC1: No integral protection against electric shock. If required, designers must provide additional protection against electric shock on equipment.,PC2: With integral protection against electric shock. Fuse-holders shall have live parts inaccessible to IEC529 standard test finger, when fully assembled, without fuse carrier or fuse in place and when fuse carrier, with fuse is being inserted or withdrawn.,PC3: With integral protection against electric shock. Fuse-holders shall have live parts inaccessible to IEC529 1mm diameter rigid test wire when fully assembled, without fuse carrier or fuse in place and when fuse carrier, with fuse is being inserted or withdrawn.