Aktuálne dodacie lehoty

Od 1. apríla 2025 vaše objednávky doručuje spoločnosť GLS. Všetky zásielky sa teraz budú doručovať cestnou dopravou. Väčšina objednávok bude doručená do 72 hodín.

Podrobné informácie

Plastová potrubní armatura, 90° Koleno Georg Fischer

Skladové číslo RS: 351-2708Značka: George FischerČíslo dielu výrobcu: 091025006
brand-logo

Technické dokumenty

Špecifikácie

Typ armatury

Elbow

Směr upevnění

90°

Podrobnosti o výrobku

Fittings – George Fischer Alprene

Typical applications are in systems for potable water supply and distribution, industrial process water, irrigation and agricultural/livestock watering. The compression fittings are designed for use with blue MDPE pipe to BS6572: 1985 for below ground applications, black MDPE pipe to BS6730: 1986 for above ground applications, copper pipe to BS2871 and imperial polyethylene to BS1972 Class C&D Low Density. They are WRc approved, in accordance with the Water Byelaws Scheme. Their maximum pressure rating is 16 bar at 20°C. They have a polypropylene body and nut, acetal grip ring and nitrile rubber seal ring. PTFE tape, and not jointing paste, should be used on BSP threads.

Mohlo by vás zaujímať
Informácie o zásobách sú dočasne nedostupné.

P.O.A.

Plastová potrubní armatura, 90° Koleno Georg Fischer

P.O.A.

Plastová potrubní armatura, 90° Koleno Georg Fischer
Informácie o zásobách sú dočasne nedostupné.

Informácie o zásobách sú dočasne nedostupné.

Skúste to znovu neskôr.

Mohlo by vás zaujímať

Technické dokumenty

Špecifikácie

Typ armatury

Elbow

Směr upevnění

90°

Podrobnosti o výrobku

Fittings – George Fischer Alprene

Typical applications are in systems for potable water supply and distribution, industrial process water, irrigation and agricultural/livestock watering. The compression fittings are designed for use with blue MDPE pipe to BS6572: 1985 for below ground applications, black MDPE pipe to BS6730: 1986 for above ground applications, copper pipe to BS2871 and imperial polyethylene to BS1972 Class C&D Low Density. They are WRc approved, in accordance with the Water Byelaws Scheme. Their maximum pressure rating is 16 bar at 20°C. They have a polypropylene body and nut, acetal grip ring and nitrile rubber seal ring. PTFE tape, and not jointing paste, should be used on BSP threads.

Mohlo by vás zaujímať