Technické dokumenty
Špecifikácie
Brand
ITT CannonPohlaví
Male
Velikost pouzdra
16
Stupeň krytí IP
IP67
Armatura pro montáž do panelu
Yes
Materiál
Polymer
Barva
Grey
Podrobnosti o výrobku
Protiprachové krytky
Plastové protiprachové krytky pro tělesa konektorů a nástrčkových panelů. Pro určení správného uzávěru je nutná pouze velikost obalu. Krytky obsahují plastový upevňovací pásek.
Neptune
Based on Trident Ringlok series, the Neptune range combines power and signal contacts. Widely used in automotive, marine and process control industries, they feature a strong bayonet coupling system with standard and reversed pin/socket combinations. A wide selection of backshell accessories, rear housings and dust caps are available.,To maintain IP67 rating the rear of the connectors have a rubber seal which is pierced upon contact insertion. The seal is held in place by a screw ring (as supplied) which may be replaced with the appropriate size backshell. For IP67 rating to be maintained, wire insulation diameters should be within the following diameters: Signal wires: 1.7 to 2.7mm, Power wires : 2.7 to 4.0mm.,Number of contacts shown as power/signal eg 2//13.
Informácie o zásobách sú dočasne nedostupné.
Skúste to znovu neskôr.
€ 6,13
Each (In a Bag of 100) (bez DPH)
100
€ 6,13
Each (In a Bag of 100) (bez DPH)
100
Technické dokumenty
Špecifikácie
Brand
ITT CannonPohlaví
Male
Velikost pouzdra
16
Stupeň krytí IP
IP67
Armatura pro montáž do panelu
Yes
Materiál
Polymer
Barva
Grey
Podrobnosti o výrobku
Protiprachové krytky
Plastové protiprachové krytky pro tělesa konektorů a nástrčkových panelů. Pro určení správného uzávěru je nutná pouze velikost obalu. Krytky obsahují plastový upevňovací pásek.
Neptune
Based on Trident Ringlok series, the Neptune range combines power and signal contacts. Widely used in automotive, marine and process control industries, they feature a strong bayonet coupling system with standard and reversed pin/socket combinations. A wide selection of backshell accessories, rear housings and dust caps are available.,To maintain IP67 rating the rear of the connectors have a rubber seal which is pierced upon contact insertion. The seal is held in place by a screw ring (as supplied) which may be replaced with the appropriate size backshell. For IP67 rating to be maintained, wire insulation diameters should be within the following diameters: Signal wires: 1.7 to 2.7mm, Power wires : 2.7 to 4.0mm.,Number of contacts shown as power/signal eg 2//13.