Kovový plášť pro konektory D-Sub, orientace těla: Rovný
Technické dokumenty
Špecifikácie
Podrobnosti o výrobku
Kryt (pro kryt kabelu typu A)
Jeden dílek na každé straně obalu, zlepšuje vzhled a poskytuje kabelovou podporu. Konce mohou být upevněny pomocí stahovací pásky, kabelu apod.
QM Range Plastic Rectangular
Connector shells in nylon, with type A and type B locking together and are shaped to ensure correct orientation before engagement. Type A is cable mounting. Type B, whilst basically snap-in chassis mounting, may also be cable mounted if an in-line connection is required. Both will accept pin or socket inserts, which fit easily into the shells without the use of special tools. The inserts may be soldered or crimped and are available in three wire entry sizes.,Use hole cutter stock no. 543-709 for 24 way. Contacts must be ordered separately - see Range 'Contacts and Tooling.' (for example Crimp Single Piece Contact 466-804 Solder Cup Contact 329-8660 Crimp Tool 531-403)
Informácie o zásobách sú dočasne nedostupné.
Skúste to znovu neskôr.
€ 2,83
Each (In a Pack of 5) (bez DPH)
5
€ 2,83
Each (In a Pack of 5) (bez DPH)
5
Kúpiť hromadne
| množstvo | Jednotková cena | Balík |
|---|---|---|
| 5 - 95 | € 2,83 | € 14,15 |
| 100 - 195 | € 2,54 | € 12,70 |
| 200+ | € 2,29 | € 11,45 |
Technické dokumenty
Špecifikácie
Podrobnosti o výrobku
Kryt (pro kryt kabelu typu A)
Jeden dílek na každé straně obalu, zlepšuje vzhled a poskytuje kabelovou podporu. Konce mohou být upevněny pomocí stahovací pásky, kabelu apod.
QM Range Plastic Rectangular
Connector shells in nylon, with type A and type B locking together and are shaped to ensure correct orientation before engagement. Type A is cable mounting. Type B, whilst basically snap-in chassis mounting, may also be cable mounted if an in-line connection is required. Both will accept pin or socket inserts, which fit easily into the shells without the use of special tools. The inserts may be soldered or crimped and are available in three wire entry sizes.,Use hole cutter stock no. 543-709 for 24 way. Contacts must be ordered separately - see Range 'Contacts and Tooling.' (for example Crimp Single Piece Contact 466-804 Solder Cup Contact 329-8660 Crimp Tool 531-403)