Technické dokumenty
Špecifikácie
Brand
ITT CannonPočet kontaktů
2
Počet řad
1
Rozteč
5.08mm
Typ montáže
Through Hole
Orientace těla
Straight
Metoda izolace
Solder
Jmenovitý proud
13.0A
Betriebsspannung
250,0 V.
Pokovení kontaktu
Tin
Materiál pouzdra
Nylon
Betriebsspannung
250,0 v AC
Krajina pôvodu
Hungary
Podrobnosti o výrobku
Montáž na PCB (zásuvka)
Tyto konektory jsou doplněny otočenými kontakty konektoru a jsou připojeny přímo k desce plošných spojů. Kontakty jsou nastaveny na rozteč 0.2in. Zajistí se pomocí plášťů kabelů typu A.
QM Range Plastic Rectangular
Connector shells in nylon, with type A and type B locking together and are shaped to ensure correct orientation before engagement. Type A is cable mounting. Type B, whilst basically snap-in chassis mounting, may also be cable mounted if an in-line connection is required. Both will accept pin or socket inserts, which fit easily into the shells without the use of special tools. The inserts may be soldered or crimped and are available in three wire entry sizes.,Use hole cutter stock no. 543-709 for 24 way. Contacts must be ordered separately - see Range 'Contacts and Tooling.' (for example Crimp Single Piece Contact 466-804 Solder Cup Contact 329-8660 Crimp Tool 531-403)
Informácie o zásobách sú dočasne nedostupné.
Skúste to znovu neskôr.
€ 3,61
Each (bez DPH)
1
€ 3,61
Each (bez DPH)
1
Technické dokumenty
Špecifikácie
Brand
ITT CannonPočet kontaktů
2
Počet řad
1
Rozteč
5.08mm
Typ montáže
Through Hole
Orientace těla
Straight
Metoda izolace
Solder
Jmenovitý proud
13.0A
Betriebsspannung
250,0 V.
Pokovení kontaktu
Tin
Materiál pouzdra
Nylon
Betriebsspannung
250,0 v AC
Krajina pôvodu
Hungary
Podrobnosti o výrobku
Montáž na PCB (zásuvka)
Tyto konektory jsou doplněny otočenými kontakty konektoru a jsou připojeny přímo k desce plošných spojů. Kontakty jsou nastaveny na rozteč 0.2in. Zajistí se pomocí plášťů kabelů typu A.
QM Range Plastic Rectangular
Connector shells in nylon, with type A and type B locking together and are shaped to ensure correct orientation before engagement. Type A is cable mounting. Type B, whilst basically snap-in chassis mounting, may also be cable mounted if an in-line connection is required. Both will accept pin or socket inserts, which fit easily into the shells without the use of special tools. The inserts may be soldered or crimped and are available in three wire entry sizes.,Use hole cutter stock no. 543-709 for 24 way. Contacts must be ordered separately - see Range 'Contacts and Tooling.' (for example Crimp Single Piece Contact 466-804 Solder Cup Contact 329-8660 Crimp Tool 531-403)