Tester PAT Vyhověl/nevyhověl PAT Třída I, třída II, číslo modelu: HPAT500 Martindale
Technické dokumenty
Špecifikácie
Brand
MartindaleTyp zkoušečky
Vyhověl/nevyhověl PAT
Typ testu
Třída I, třída II
Metoda testování
Manuální
Typ zástrčky
Type G - British 3-pin
Napájecí zdroj
Battery
Typ baterie
AA x 6
Rozměry
210 x 90 x 54mm
Hmotnost
700g
Výška
54mm
Délka
210mm
Betriebstemperatur max.
+40°C
Maximální napájecí napětí
230V
Breite
90mm
Minimální provozní teplota
-10°C
Číslo modelu p
HPAT500
Krajina pôvodu
Taiwan, Province Of China
Podrobnosti o výrobku
Hand-held HPAT500 Martindale PAT Tester
The Martindale HPAT500 is a low volume PAT tester. Battery powered, this portable appliance tester offers ease of use, combined with the legal minimum requirement for the testing of class 1 & class 2 appliances, as well as IEC & extension leads.With one-button test selection, the HPAT500 PAT tester is fast and gives test results with a pass / fail indication. The tester is completely safe for testing of IT equipment, as it will only perform an earth bond test at 200mA
Protection class: IP20Temperature Range: -10 to 40°C, non-condensingBatteries: 6 x 1.2V AA NiMH rechargeable batteries 1800mAh, or greaterAuto Power Down: After 10 minutes of inactivity, or when battery lowEarth Bond Test (IT Safe) Test Current: 200mA DC Test Voltage: 4V DC Default Pass Value: 0.1Ω Secondary Pass Value: 0.2Ω Insulation Resistance Test Voltage: >500V DC at 1mA Display Range: 0.20Megohm - 19.99Megohm Pass Value: 1Megohm Class I, 2Megohm Class II IEC & Extension Lead Test Earth Continuity: 200mA DC Insulation Test: 500V DC Wiring Test: Live, Neutral Continuity& Polarity Fuse Test Test Voltage: 4V DC Test Current: 200mA DC Pass Level: >2mA
Supplied with
Earth bond probe & croc clip, rechargeable NiMH batteries, mains battery charger, extension lead adaptor, soft carry case and instruction manual
Informácie o zásobách sú dočasne nedostupné.
Skúste to znovu neskôr.
P.O.A.
1
P.O.A.
1
Technické dokumenty
Špecifikácie
Brand
MartindaleTyp zkoušečky
Vyhověl/nevyhověl PAT
Typ testu
Třída I, třída II
Metoda testování
Manuální
Typ zástrčky
Type G - British 3-pin
Napájecí zdroj
Battery
Typ baterie
AA x 6
Rozměry
210 x 90 x 54mm
Hmotnost
700g
Výška
54mm
Délka
210mm
Betriebstemperatur max.
+40°C
Maximální napájecí napětí
230V
Breite
90mm
Minimální provozní teplota
-10°C
Číslo modelu p
HPAT500
Krajina pôvodu
Taiwan, Province Of China
Podrobnosti o výrobku
Hand-held HPAT500 Martindale PAT Tester
The Martindale HPAT500 is a low volume PAT tester. Battery powered, this portable appliance tester offers ease of use, combined with the legal minimum requirement for the testing of class 1 & class 2 appliances, as well as IEC & extension leads.With one-button test selection, the HPAT500 PAT tester is fast and gives test results with a pass / fail indication. The tester is completely safe for testing of IT equipment, as it will only perform an earth bond test at 200mA
Protection class: IP20Temperature Range: -10 to 40°C, non-condensingBatteries: 6 x 1.2V AA NiMH rechargeable batteries 1800mAh, or greaterAuto Power Down: After 10 minutes of inactivity, or when battery lowEarth Bond Test (IT Safe) Test Current: 200mA DC Test Voltage: 4V DC Default Pass Value: 0.1Ω Secondary Pass Value: 0.2Ω Insulation Resistance Test Voltage: >500V DC at 1mA Display Range: 0.20Megohm - 19.99Megohm Pass Value: 1Megohm Class I, 2Megohm Class II IEC & Extension Lead Test Earth Continuity: 200mA DC Insulation Test: 500V DC Wiring Test: Live, Neutral Continuity& Polarity Fuse Test Test Voltage: 4V DC Test Current: 200mA DC Pass Level: >2mA
Supplied with
Earth bond probe & croc clip, rechargeable NiMH batteries, mains battery charger, extension lead adaptor, soft carry case and instruction manual