4-20mA ATEX accelerometer,0-10mm/sec
Technické dokumenty
Špecifikácie
Brand
MonitranPodrobnosti o výrobku
MTN1185I Schváleno Akcelerometr ATEX, řada 4-20mA
ATEX Skupina I a II schválila
Používá se pro sběr dat IS, těžbu ropy, apod.
Výstup 4-20mA pro rozhraní PLC
Výstup proporcionální rychlosti RMS (mm/s)
K dispozici s rozsahem rychlosti 0-10mm/s (533-2368) nebo 0-25mm/s (533-2374)
Frekvence od 2 Hz do 1 kHz
Dynamický rozsah: Peak 50
5metrový pancéřovaný kabel PTFE
IP 67 Pouzdro z nerezavějící oceli
Pro použití s lepeným spojem nebo montážním kolíkem M8
Rozměry (DXL): 27 x 43 mm
Accelerometers
Vibration sensors use solid-state piezoelectric accelerometers to detect the level of vibration in rotating elements like bearings and gearboxes on machinery such as motors, generators, pumps, fans and compressors. Regular vibration measurements on all critical machines as part of the maintenance regime can detect early signs of failure and provide a way to eliminate these problems. Bearing wear, poor balance and loose mounting all lead to the failure of rotating machinery. Unexpected machinery failure leads to unplanned maintenance costs, loss of production plus potential Health and Safety hazards. They are rugged, adaptable to all types of machinery and conditions including operation in hazardous areas, easy to install and require no maintenance. Used in conjunction with off- and on-line vibration analysers they yield valuable diagnostic information on the machinery's condition and reveal where and when failure may occur allowing pre-emptive maintenance intervention. The dc (velocity) outputs integrate this complex signal into a simple dc signal of 4-20mA proportional to the overall vibration of the machine, ideal for monitoring with all types of industrial controllers.
Informácie o zásobách sú dočasne nedostupné.
Skúste to znovu neskôr.
P.O.A.
1
P.O.A.
1
Technické dokumenty
Špecifikácie
Brand
MonitranPodrobnosti o výrobku
MTN1185I Schváleno Akcelerometr ATEX, řada 4-20mA
ATEX Skupina I a II schválila
Používá se pro sběr dat IS, těžbu ropy, apod.
Výstup 4-20mA pro rozhraní PLC
Výstup proporcionální rychlosti RMS (mm/s)
K dispozici s rozsahem rychlosti 0-10mm/s (533-2368) nebo 0-25mm/s (533-2374)
Frekvence od 2 Hz do 1 kHz
Dynamický rozsah: Peak 50
5metrový pancéřovaný kabel PTFE
IP 67 Pouzdro z nerezavějící oceli
Pro použití s lepeným spojem nebo montážním kolíkem M8
Rozměry (DXL): 27 x 43 mm
Accelerometers
Vibration sensors use solid-state piezoelectric accelerometers to detect the level of vibration in rotating elements like bearings and gearboxes on machinery such as motors, generators, pumps, fans and compressors. Regular vibration measurements on all critical machines as part of the maintenance regime can detect early signs of failure and provide a way to eliminate these problems. Bearing wear, poor balance and loose mounting all lead to the failure of rotating machinery. Unexpected machinery failure leads to unplanned maintenance costs, loss of production plus potential Health and Safety hazards. They are rugged, adaptable to all types of machinery and conditions including operation in hazardous areas, easy to install and require no maintenance. Used in conjunction with off- and on-line vibration analysers they yield valuable diagnostic information on the machinery's condition and reveal where and when failure may occur allowing pre-emptive maintenance intervention. The dc (velocity) outputs integrate this complex signal into a simple dc signal of 4-20mA proportional to the overall vibration of the machine, ideal for monitoring with all types of industrial controllers.