Indikátor, objímka žárovky: E10, barva čočky: Čirá, 2.5 V, 250 mA 30h

Technické dokumenty
Špecifikácie
Brand
RS ProBetriebsspannung
2.5 V
Objímka žárovky
E10
Jmenovitý proud
250 mA
Průměr
11mm
Velikost žárovky
G3 1/2
Länge
24 mm
Barva čočky
Clear
Životnost v hodinách
30h
Krajina pôvodu
Korea, Republic Of
Podrobnosti o výrobku
Kulaté MES G-3 (11 mm)
Screw (LES, MES, SES)
Filament lamps will perform to specification and give optimum life when: they are powered at the rated voltage from a stabilised 50Hz ac supply; the ambient temperature is in the range +20°C to +25°C; and where no mechanical vibration is present.
Deviations from these criteria can have a significant effect on lamp life, particularly with low current filaments (<80mA).
Operation from a DC supply at rated voltage can reduce specified life by up to 50%. The effect of variation from the rated operating voltage should be noted: 5% above will reduce lamp life by up to 50%. 5% below will significantly increase lamp life. Current consumption can vary by up to ±10% on stated values at rated supply voltage. Care should therefore be exercised when running a number of lamps in series. In such applications it is recommended that the rated voltage be reduced by 10% to prevent premature failure of individual lamps.
Conversion of light output units: Lumens = MSCP x 12.6, MSCP = Lumens / 12.6.
€ 9,87
€ 0,987 Each (In a Pack of 10) (bez DPH)
10
€ 9,87
€ 0,987 Each (In a Pack of 10) (bez DPH)
10
Informácie o zásobách sú dočasne nedostupné.
Skúste to znovu neskôr.
Množstvo | Jednotková cena | Balík |
---|---|---|
10 - 240 | € 0,987 | € 9,87 |
250 - 990 | € 0,916 | € 9,16 |
1000 - 4990 | € 0,868 | € 8,68 |
5000 - 9990 | € 0,835 | € 8,35 |
10000+ | € 0,819 | € 8,19 |
Technické dokumenty
Špecifikácie
Brand
RS ProBetriebsspannung
2.5 V
Objímka žárovky
E10
Jmenovitý proud
250 mA
Průměr
11mm
Velikost žárovky
G3 1/2
Länge
24 mm
Barva čočky
Clear
Životnost v hodinách
30h
Krajina pôvodu
Korea, Republic Of
Podrobnosti o výrobku
Kulaté MES G-3 (11 mm)
Screw (LES, MES, SES)
Filament lamps will perform to specification and give optimum life when: they are powered at the rated voltage from a stabilised 50Hz ac supply; the ambient temperature is in the range +20°C to +25°C; and where no mechanical vibration is present.
Deviations from these criteria can have a significant effect on lamp life, particularly with low current filaments (<80mA).
Operation from a DC supply at rated voltage can reduce specified life by up to 50%. The effect of variation from the rated operating voltage should be noted: 5% above will reduce lamp life by up to 50%. 5% below will significantly increase lamp life. Current consumption can vary by up to ±10% on stated values at rated supply voltage. Care should therefore be exercised when running a number of lamps in series. In such applications it is recommended that the rated voltage be reduced by 10% to prevent premature failure of individual lamps.
Conversion of light output units: Lumens = MSCP x 12.6, MSCP = Lumens / 12.6.