Technické dokumenty
Špecifikácie
Pohlaví
Female
Počet řad
1
Orientace
Straight
Počet kontaktů
2
Barva
Black
Materiál kontaktu
Beryllium Copper
Šířka
2.54mm
Hloubka
6.35mm
Rozteč
5.08mm
Pokovení kontaktu
Tin over Nickel
Délka
7.62mm
Typ
Open Top
Brand
TE ConnectivityŘada
AMPMODU
Krajina pôvodu
United States
Podrobnosti o výrobku
Montáž na PCB (kolík)
Tyto konektory jsou doplněny otočenými kontakty a lze je připojit přímo k desce plošných spojů. Kontakty jsou nastaveny na rozteč 0.2in. Zajistí se pomocí plášťů kabelů typu A.
QM Range Plastic Rectangular
Connector shells in nylon, with type A and type B locking together and are shaped to ensure correct orientation before engagement. Type A is cable mounting. Type B, whilst basically snap-in chassis mounting, may also be cable mounted if an in-line connection is required. Both will accept pin or socket inserts, which fit easily into the shells without the use of special tools. The inserts may be soldered or crimped and are available in three wire entry sizes.,Use hole cutter stock no. 543-709 for 24 way. Contacts must be ordered separately - see Range 'Contacts and Tooling.' (for example Crimp Single Piece Contact 466-804 Solder Cup Contact 329-8660 Crimp Tool 531-403)
Informácie o zásobách sú dočasne nedostupné.
Skúste to znovu neskôr.
€ 0,51
Each (In a Box of 2000) (bez DPH)
2000
€ 0,51
Each (In a Box of 2000) (bez DPH)
2000
Technické dokumenty
Špecifikácie
Pohlaví
Female
Počet řad
1
Orientace
Straight
Počet kontaktů
2
Barva
Black
Materiál kontaktu
Beryllium Copper
Šířka
2.54mm
Hloubka
6.35mm
Rozteč
5.08mm
Pokovení kontaktu
Tin over Nickel
Délka
7.62mm
Typ
Open Top
Brand
TE ConnectivityŘada
AMPMODU
Krajina pôvodu
United States
Podrobnosti o výrobku
Montáž na PCB (kolík)
Tyto konektory jsou doplněny otočenými kontakty a lze je připojit přímo k desce plošných spojů. Kontakty jsou nastaveny na rozteč 0.2in. Zajistí se pomocí plášťů kabelů typu A.
QM Range Plastic Rectangular
Connector shells in nylon, with type A and type B locking together and are shaped to ensure correct orientation before engagement. Type A is cable mounting. Type B, whilst basically snap-in chassis mounting, may also be cable mounted if an in-line connection is required. Both will accept pin or socket inserts, which fit easily into the shells without the use of special tools. The inserts may be soldered or crimped and are available in three wire entry sizes.,Use hole cutter stock no. 543-709 for 24 way. Contacts must be ordered separately - see Range 'Contacts and Tooling.' (for example Crimp Single Piece Contact 466-804 Solder Cup Contact 329-8660 Crimp Tool 531-403)