Technické dokumenty
Špecifikácie
Brand
TE ConnectivityTyp spojky
Butt
Product Type
Splice Connector
Průměr
3.7 mm
Minimum Wire Size AWG
26 AWG
Izolace
Insulated
Maximum Wire Size AWG
10 AWG
Colour
Red
Izolační materiál
Nylon
Řada
DuraSeal
Materiál kontaktu
Copper
Termination Type
Crimp
Pokovení kontaktu
Tin
Normy/schválení
No
Krajina pôvodu
Mexico
Podrobnosti o výrobku
Rovné spojky
Červená 0,25 - 1,6 mm²
Modrá 1,0 - 2,6 mm²
Žlutá 2,7 - 6,6 mm²
Approvals
UL
Duraseal Heatshrinkable
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.
Approvals
UL Listed
Informácie o zásobách sú dočasne nedostupné.
€ 165,55
€ 0,662 Each (Supplied in a Bag) (bez DPH)
Výrobné balenie (Sáčok)
250
€ 165,55
€ 0,662 Each (Supplied in a Bag) (bez DPH)
Informácie o zásobách sú dočasne nedostupné.
Výrobné balenie (Sáčok)
250
Technické dokumenty
Špecifikácie
Brand
TE ConnectivityTyp spojky
Butt
Product Type
Splice Connector
Průměr
3.7 mm
Minimum Wire Size AWG
26 AWG
Izolace
Insulated
Maximum Wire Size AWG
10 AWG
Colour
Red
Izolační materiál
Nylon
Řada
DuraSeal
Materiál kontaktu
Copper
Termination Type
Crimp
Pokovení kontaktu
Tin
Normy/schválení
No
Krajina pôvodu
Mexico
Podrobnosti o výrobku
Rovné spojky
Červená 0,25 - 1,6 mm²
Modrá 1,0 - 2,6 mm²
Žlutá 2,7 - 6,6 mm²
Approvals
UL
Duraseal Heatshrinkable
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.
Approvals
UL Listed
