Dělený konektor (izolační svorka), řada: DuraSeal s tlačnými kontakty, 16→ 14 AWG izol., pokovení: Cín barva
Technické dokumenty
Špecifikácie
Brand
TE ConnectivityTyp spojky
Čelní kontakt
Velikost vodiče
16→ 14 AWG
Celková délka
36mm
Durchmesser
4.6mm
Izolace
Izolované
Barva
Blue
Řada
Duraseal
Materiál kontaktu
Copper
Pokovení kontaktu
Tin
Krajina pôvodu
Mexico
Podrobnosti o výrobku
Rovné spojky
Červená 0,25 - 1,6 mm²
Modrá 1,0 - 2,6 mm²
Žlutá 2,7 - 6,6 mm²
Approvals
UL
Duraseal Heatshrinkable
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.
Approvals
UL Listed
Informácie o zásobách sú dočasne nedostupné.
Skúste to znovu neskôr.
€ 23,85
€ 0,477 Each (In a Pack of 50) (bez DPH)
50
€ 23,85
€ 0,477 Each (In a Pack of 50) (bez DPH)
50
Kúpiť hromadne
| množstvo | Jednotková cena | Balík |
|---|---|---|
| 50 - 200 | € 0,477 | € 23,85 |
| 250 - 1200 | € 0,439 | € 21,94 |
| 1250 - 2450 | € 0,391 | € 19,55 |
| 2500 - 4950 | € 0,358 | € 17,89 |
| 5000+ | € 0,334 | € 16,70 |
Technické dokumenty
Špecifikácie
Brand
TE ConnectivityTyp spojky
Čelní kontakt
Velikost vodiče
16→ 14 AWG
Celková délka
36mm
Durchmesser
4.6mm
Izolace
Izolované
Barva
Blue
Řada
Duraseal
Materiál kontaktu
Copper
Pokovení kontaktu
Tin
Krajina pôvodu
Mexico
Podrobnosti o výrobku
Rovné spojky
Červená 0,25 - 1,6 mm²
Modrá 1,0 - 2,6 mm²
Žlutá 2,7 - 6,6 mm²
Approvals
UL
Duraseal Heatshrinkable
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.
Approvals
UL Listed