Ovládací kabel, řada: Alpha Essentials Communication & Control 10žilový, 300V Polyvinylchlorid plášť 0.23mm² 24 AWG,

Belden Alpha Essentials Communication & Control Series Control Cable, 30m Cable Length, 10 Cores - 1219/10C SL005

This control cable is a screened, 10-conductor cable designed for communication and control duties in industrial environments. It combines tin-plated stranded conductors with a slate PVC jacket and a screened assembly to support signal integrity for automation and instrumentation wiring at up to 300 V. The cable is intended for installations where low smoke, reduced corrosive gas emissions and recognised safety ratings are required.

Features & Benefits

• 10 conductors provide multi-signal capability for assemblies
  7-strand tin-plated conductors improve Flex and termination
  Screened construction reduces EMI for cleaner signals
  LSZH and VW-1/FT1/FT4 ratings reduce toxic smoke hazards
  Temperature range −20 °C to +80 °C for typical plant use
  Slate PVC jacket offers mechanical protection and colour ID

**Applications**

• Suitable for control and signal wiring in factory automation
  Ideal for remote circuit control and instrumentation systems
  Used for intercom and low-voltage audio distribution setups
  Suitable for security and building management control loops
  Can be used with PLCs and distributed I/O networks

What conductor construction is used for flexibility and soldering?

Conductors are stranded with seven strands each and are tin-plated to aid solderability and resist corrosion in termination processes.

How does the screening affect installation in noisy electrical environments?

The overall screen preserves signal integrity by providing an electrical return and shielding against electromagnetic interference, reducing crosstalk and improving transmission reliability.

What mechanical and environmental limits should be observed during routing?

The cable’s jacket is PVC
avoid prolonged exposure above +80 °C, below −20 °C, and protect from Sharp edges and excessive tensile loads during installation.

Which approvals and voltage ratings apply for system design?

The cable is intended for 300V applications and carries approvals to recognised test standards relevant to control and communication installations.

Approvals

ULAWM 2576 (150 V), VW-1, UL CM, CSA FT4