Komunikační a bezdrátový vývojový nástroj pro Rozšiřovací deska Rozšiřovací deska Xplained Pro Zigbit Microchip,

ZigBit Sub-1GHz AT86RF212B Extension Board

The Atmel ZigBit™ extension board ATZB-212B-XPRO supports the AT86RF212B wireless transceiver module. It is used to evaluate the module and can operate plugged into an Xplained Pro board or wired into a developer's prototype system. Designed for IEEE 802.15.4-2003/2006, IEEE 802.15.4c-2009 compliant WPAN communication and ZigBee mesh network operation, it also supports the 6LoWPAN protocol.

• ZigBit Sub-1GHz AT86RF212B Module
• Xplained Pro 20-pin connector
• Headers for ZigBit pins not routed to Xplained Pro connector
• Header for monitoring ZigBit current
• ZigBit reset pushbutton
• ZigBit ATZB-RF-212B module
• AT86RF212B 700/800/900MHz ISM-Band Transceiver chip
• RF Output Power: Up to +10dBm
• Receiver sensitivity: -110dBm
• Modulation: BPSK, O-QPSK
• OTA data rate: Up to 1Mbps
• AES-128 encryption
• MAC hardware accelerator
• Pre-loaded with Atmel assigned 64-bit MAC address
• 128byte FIFO Tx/Rx buffer
• Host communication: serial SPI
• Built-in chip antenna
• MS-147 RF test connector
• Power supply: +1.8 to +3.6Vdc
• Dimensions: 25 x 20 x 3.2mm
• Applications: Industrial Control, Residential and commercial automation, Health care, Consumer electronics, PC peripherals and local communication for the Internet of Things (IoT)