Datový kabel, řada: XTRA-GUARD 2 2 párů v balení, Polyvinylchlorid, 300V 0.35 mm², chování ohně: Zkouška hořlavosti:

Belden XTRA-GUARD 2 Series Data Cable, 30m Cable Length, Black Jacket - 25482 BK005

This data cable is a 2-pair communication cable designed for industrial and automation environments, providing screened pair construction and a robust outer jacket for reliable signal transmission in installations requiring moderate mechanical protection and temperature resilience.

Features & Benefits

• 0.35mm² tinned copper conductor for consistent conductivity and Flexibility
  7-strand conductor construction allowing improved Flex life
  Shielded foil with drain for reduced electromagnetic interference
  PVC outer jacket rated to 90°C for elevated operating temperatures
  VW-1 flame-retardant rating enhancing fire safety in installations
  300V voltage rating suitable for standard control and signal circuits

**Applications**

• Suitable for data links in factory automation control cabinets
  Ideal for signal wiring in electrical panel assemblies
  Used with sensors and actuators requiring screened pair cables
  Can be used for machine-to-machine communications in mechanical systems
  Used for wiring in test and measurement benches

What materials comprise the conductors and how do they affect handling?

Conductors are tinned copper with seven strands per core, which improves flexibility for repetitive motion and eases termination while maintaining conductivity.

How is the cable screened and what does that provide?

Each paired assembly is wrapped and an overall aluminium/Mylar foil with a drain conductor is applied, offering predictable EMI rejection for sensitive signal lines.

What environmental resistances does the outer covering offer?

The outer jacket is PVC that provides sunlight resistance and a specified temperature range down to -30°C and up to 90°C for varied indoor and some outdoor exposures.

What mechanical limits should be observed during installation?

Minimum bend radius is ten times the cable diameter and maximum pull tension is 27 lb to avoid damage during routing and termination.

How is identification marked on the cable for traceability?

The sheath carries a printed product code and factory identifier along the jacket for inventory and installation tracking.