Datový kabel, řada: XTRA-GUARD FLEX 1 párů v balení, Polyvinylchlorid, 300V 0.2 mm², chování ohně: FT4 Alpha Wire 30 m,

Belden XTRA-GUARD FLEX Series Data Cable, 30m Cable Length, Slate Jacket - 86601CY SL005

This data cable is a single-pair communication cable intended for continuous-flex installations in automation, electrical and electronics environments. It combines a tin-plated copper conductor with a PVC outer jacket to deliver signal transmission for control and instrumentation runs where flexibility and thermal endurance are required.

Features & Benefits

• 0.2mm² tin copper conductor for consistent signal integrity
  10-strand copper core cable offering enhanced Flex life
  300V rating suited to low-voltage control circuits
  FT4 PVC jacket slate cable providing fire behaviour classification
  Maximum operating temperature 105°C for high-heat environments
  Outside diameter 5.18mm enabling low-profile routing

**Applications**

• Suitable for Flexible motion assemblies in automation equipment
  Ideal for cabling sensor and actuator pairs in control panels
  Used with trolley or drag-chain systems requiring continuous Flex
  Can be used for fieldbus or point-to-point communication runs
  Used for wiring in electrical cabinets where space is limited

What construction elements contribute to Flex performance?

The conductor is tinned copper arranged as ten strands with a combination of foil and braided tinned-copper shielding Plus polyester core wrap to reduce chafing and maintain integrity under repeated bending.

How does the cable handle environmental directives and restrictions?

The item is declared compliant with RoHS and does not contain REACH-listed SVHCs above threshold limits, and it carries CE marking for low-voltage products.

What are the recommended handling limits for installation?

Static temperature range spans -10 to 105°C and dynamic operation is permitted from +5 to 105°C with bend-radius recommendations of 10x and 15x cable diameter for static and dynamic installations respectively.

What electrical characteristics aid in system design?

Typical electrical data include mutual capacitance of about 35 pF/ft, ground capacitance of about 63 pF/ft and characteristic impedance near 54 Ω for impedance-sensitive circuits.