Broadcom Polovodičové relé 0.4 A Povrch SPST 600 V ASSR-5211 0.8V

High Current, 1 Form A, Solid State Relay (MOSFET) (600V/0.2A/16Ω)

The ASSR-5211 Solid State Relay (SSR) is specifically designed for high current applications, commonly found in the industrial equipments.The relay is a solid-state replacement for single-pole, normally-open, (1 Form A) electromechanical relays.;The ASSR-5211 consists of an AlGaAs infrared light-emitting diode (LED) input stage optically coupled to a high-voltage output detector circuit. The detector consists of a high-speed photovoltaic diode array and driver circuitry to switch on/off two discrete high voltage MOSFETs. The relay turns on (contact closes) with a minimum input current of 3mA through the input LED. The relay turns off (contact opens) with an input voltage of 0.8V or less.;The ASSR-5211 connection A, as shown in the schematic, allows the relay to switch either ac or dc loads. The connection B, with its advantages of reduced on-resistance and higher output current, allows the relays to switch dc loads only.;The electrical and switching characteristics are specified over the temperature range of -40°C to +85°C.

ASSR-5211, High Current, 1 Form A, Solid State Relay (MOSFET), 600V/0.2A/16Ohm)

Features

• <li> Compact Solid-State Bi-directional Signal Switch</li>;<li> Single Channel Normally-off</li>;<li> Single-Pole-Single-Throw (SPST) Relay</li>;<li> 600V Output Withstand Voltage</li>;<li> 0.2A or 0.4A Current Rating</li>;<li> Low On-Resistance: 4Ω Typical for DC-only, 16Ω Typical for AC/DC</li>;<li> High Speed Switching: 0.7ms (Ton), 0.07ms (Toff) Typical</li>;<li> High Transient Immunity: >1kV/μs</li>;<li> High Input-to-Output Insulation Voltage (Safety and Regulatory Approvals)</li>; 3750 Vrms for 1 min per UL1577; CSA Component Acceptance

Applications

• Industrial Controls</li>;<li> Factory Automation</li>;<li> Data Acquisition</li>;<li> Measuring Instrument</li>;<li> Medical System</li>;<li> Security System</li>;<li> EMR / Reed Relay Replacement