Technické Dokumenty
Špecifikácie
Brand
Delta-MobreyTyp zařízení
Spínač hladiny pevných látek
Typ produktu
Spínač hladiny
Typ montáže
Svislá montáž, Horizontální
Materiál pouzdra
Aluminium Alloy
Délka kabelu
235mm
Betriebstemperatur min.
-20°C
Maximální pracovní teplota
110°C
Maximální střídavé napětí
265V ac
Maximální stejnosměrné napětí
55V dc
Maximální proud
8A
Maximální tlak
10bar
Materiál těsnění
Non-Asbestos Sheet
Normy/schválení
No
Certifikace pro nebezpečné prostory
ATEX
Řada
VLS
Podrobnosti o výrobku
The Mobrey vibrating rod level switch is the perfect solution for single-point level switching in free-flowing solids across a wide density range, from fine powders to grains. A single rod design provides the solution to tuning forks which may become blocked or bridged. The vibration rod is energized and kept in resonance by an electronic circuit. When covered by material, the damping of the vibration is detected by the electronics which initiate the switching of the output relay after a built-in programmable time delay.
Supplied with:
User manual, 2 – 3-pole terminal blocks, 1in sealing, 2 – Pg 16 cable glands.
How do you carry out an installation?
Requiring only a 1in BSP/NPT socket, either on the top or in the sidewall of the silo, the unit is easy to install and simple to the commission.
Prior to installation, it is advised to check the switching function for proper adjustment on a sample quantity of material. The unit may not work with mediums within specified density range but having a very large size of granules or extremely little friction.
WARNING!
Handle device with great care, especially the sensing probe. Any impact on the sensing probe can ruin its resonance system.
A protective shield should be installed if the probe is exposed to falling material or an excessive mechanical load.
Informácie o zásobách sú dočasne nedostupné.
€ 838,38
€ 838,38 Each (bez DPH)
1
€ 838,38
€ 838,38 Each (bez DPH)
Informácie o zásobách sú dočasne nedostupné.
1
Technické Dokumenty
Špecifikácie
Brand
Delta-MobreyTyp zařízení
Spínač hladiny pevných látek
Typ produktu
Spínač hladiny
Typ montáže
Svislá montáž, Horizontální
Materiál pouzdra
Aluminium Alloy
Délka kabelu
235mm
Betriebstemperatur min.
-20°C
Maximální pracovní teplota
110°C
Maximální střídavé napětí
265V ac
Maximální stejnosměrné napětí
55V dc
Maximální proud
8A
Maximální tlak
10bar
Materiál těsnění
Non-Asbestos Sheet
Normy/schválení
No
Certifikace pro nebezpečné prostory
ATEX
Řada
VLS
Podrobnosti o výrobku
The Mobrey vibrating rod level switch is the perfect solution for single-point level switching in free-flowing solids across a wide density range, from fine powders to grains. A single rod design provides the solution to tuning forks which may become blocked or bridged. The vibration rod is energized and kept in resonance by an electronic circuit. When covered by material, the damping of the vibration is detected by the electronics which initiate the switching of the output relay after a built-in programmable time delay.
Supplied with:
User manual, 2 – 3-pole terminal blocks, 1in sealing, 2 – Pg 16 cable glands.
How do you carry out an installation?
Requiring only a 1in BSP/NPT socket, either on the top or in the sidewall of the silo, the unit is easy to install and simple to the commission.
Prior to installation, it is advised to check the switching function for proper adjustment on a sample quantity of material. The unit may not work with mediums within specified density range but having a very large size of granules or extremely little friction.
WARNING!
Handle device with great care, especially the sensing probe. Any impact on the sensing probe can ruin its resonance system.
A protective shield should be installed if the probe is exposed to falling material or an excessive mechanical load.