Technické Dokumenty
Špecifikácie
Brand
MolexTyp produktu
PCB Header
Řada
Micro-Fit 3.0
Rozteč
3mm
Proud
5A
Počet kontaktů
6
Materiál pouzdra
Thermoplastic
Počet řad
2
Orientace
Right Angle
Krytý/Nekrytý
Shrouded
Konverzní jednotka svorky konektoru
Wire-to-Board
Typ montáže
Surface
Materiál kontaktu
Brass
Pokovení kontaktu
Tin
Minimální provozní teplota
-40°C
Rozteč řádků
3mm
Typ zakončení
Solder
Pohlaví kontaktu
Male
Maximální pracovní teplota
105°C
Normy/schválení
No
Napětí
250V
Krajina pôvodu
Mexico
Podrobnosti o výrobku
Micro-Fit 3.0 3mm pitch wire to board dual row PCB through hole and SMT headers which form part of a Compact power connector system providing a low to mid-range power distribution solution. With the Ability to carry up to 5A of current, Micro-Fit 3.0 connectors have one of the highest current carrying abilities in the smallest footprints available. These Micro-Fit 3.0 PCB headers incorporate positive latching in the form of a locking ramp on the housing for secure mating and to prevent accidental disconnection. The housings are MADE of high-temperature UL 94V-0 Liquid Crystal Polymer that can withstand temperatures of up to 265°C during the IR reflow soldering process. The through hole mounting versions of these Micro-Fit 3.0 headers are also SMT compatible which means a reduction in process requirements and costs. To secure these Micro-Fit 3.0 headers to the PCB board, metal press-fit retention clips are incorporated into the connector design. The contacts of these Micro-Fit 3.0 headers are fully isolated within the housings to reduce arcing. Tin or a choice of two thicknesses of gold contact platings are available to keep down costs.
These Micro-Fit 3.0 header connectors are suitable for use in a wide range of low to mid power applications including the following:
Military COTS (Commercial Off The Shelf)
Solar power
Consumer products (dryers, freezers, fridges, washing machines)
Data communications (routers, servers)
Medical
Telecommunications
Gaming terminals
Informácie o zásobách sú dočasne nedostupné.
€ 147,80
€ 2,956 Each (Supplied on a Reel) (bez DPH)
Výrobné balenie (Cievka)
50
€ 147,80
€ 2,956 Each (Supplied on a Reel) (bez DPH)
Informácie o zásobách sú dočasne nedostupné.
Výrobné balenie (Cievka)
50
| Množstvo | Jednotková cena | Cievka |
|---|---|---|
| 50 - 90 | € 2,956 | € 29,56 |
| 100 - 240 | € 2,605 | € 26,05 |
| 250 - 490 | € 2,504 | € 25,04 |
| 500+ | € 2,403 | € 24,03 |
Technické Dokumenty
Špecifikácie
Brand
MolexTyp produktu
PCB Header
Řada
Micro-Fit 3.0
Rozteč
3mm
Proud
5A
Počet kontaktů
6
Materiál pouzdra
Thermoplastic
Počet řad
2
Orientace
Right Angle
Krytý/Nekrytý
Shrouded
Konverzní jednotka svorky konektoru
Wire-to-Board
Typ montáže
Surface
Materiál kontaktu
Brass
Pokovení kontaktu
Tin
Minimální provozní teplota
-40°C
Rozteč řádků
3mm
Typ zakončení
Solder
Pohlaví kontaktu
Male
Maximální pracovní teplota
105°C
Normy/schválení
No
Napětí
250V
Krajina pôvodu
Mexico
Podrobnosti o výrobku
Micro-Fit 3.0 3mm pitch wire to board dual row PCB through hole and SMT headers which form part of a Compact power connector system providing a low to mid-range power distribution solution. With the Ability to carry up to 5A of current, Micro-Fit 3.0 connectors have one of the highest current carrying abilities in the smallest footprints available. These Micro-Fit 3.0 PCB headers incorporate positive latching in the form of a locking ramp on the housing for secure mating and to prevent accidental disconnection. The housings are MADE of high-temperature UL 94V-0 Liquid Crystal Polymer that can withstand temperatures of up to 265°C during the IR reflow soldering process. The through hole mounting versions of these Micro-Fit 3.0 headers are also SMT compatible which means a reduction in process requirements and costs. To secure these Micro-Fit 3.0 headers to the PCB board, metal press-fit retention clips are incorporated into the connector design. The contacts of these Micro-Fit 3.0 headers are fully isolated within the housings to reduce arcing. Tin or a choice of two thicknesses of gold contact platings are available to keep down costs.
These Micro-Fit 3.0 header connectors are suitable for use in a wide range of low to mid power applications including the following:
Military COTS (Commercial Off The Shelf)
Solar power
Consumer products (dryers, freezers, fridges, washing machines)
Data communications (routers, servers)
Medical
Telecommunications
Gaming terminals