Kondenzátor, řada: FK SMD 100 μF 0.2 Pájecí 170mΩ 100V dc, Povrch 0125 EEVFK2A101M AEC-Q200 Panasonic

Panasonic Capacitor, 100μF Capacitance, 100V DC Voltage - EEVFK2A101M

This capacitor is a polar surface-mount electrolytic component designed for use in automotive and industrial electronic circuits where high-voltage smoothing and energy storage are required. It operates across a wide temperature range and is intended for board-mounted applications that demand compact, high-voltage capacitance with soldered terminations.

Features and Benefits:

• Rated at 100V DC for high-voltage smoothing applications
  Capacitance of 100μF for energy storage and decoupling performance
  Low ESR of 170mΩ to reduce heat and improve filtering efficiency
  Ripple current handling of 793mA to support dynamic load cycles
  Operates up to 105°C for elevated temperature endurance
  AEC‑Q200 qualification for suitability in automotive environments

Applications

• Suitable for automotive power-supply stabilisation on control modules
  Ideal for DC link and buffer stages in motor-control inverters
  Used for smoothing in industrial sensor and actuator electronics
  Can be used for decoupling in high-voltage power assemblies

What are the expected service conditions for long-term use?

The device is specified for an operational lifetime of 5000h at rated conditions and elevated temperature, enabling predictable ageing for end-of-life calculations.

How is the component mounted and supplied for automated assembly?

It is supplied on carrier tape in an 0125 package and intended for surface-mount placement with solder terminations.

What mechanical form factor should be allowed in PCB layout?

The component uses an aluminium case with a diameter of 16mm and a height of 16.5 mm, so board keep-out and clearance must accommodate a cylindrical SMD part.

What electrical leakage and tolerance parameters affect circuit design?

Expect a leakage current of 100μA at rated voltage and a capacitance tolerance of ±20%, which should be factored into tolerance and bias calculations.

Approvals

AEC-Q200 qualified