
Technické Dokumenty
Špecifikácie
Brand
RS ProTyp produktu
Indicator Light
Napětí
130V
Podtyp
Indicator Lamp
Základna/zásuvka žárovky
E10
Proud
20mA
Durchmesser
10mm
Länge
28mm
Barva čočky
Clear
Označení žárovky
T3 1/4
Světelný výkon
3 lm
Životnost
3000h
Normy/schválení
RoHS
Krajina pôvodu
Korea, Republic Of
Podrobnosti o výrobku
T-3¼ (10mm) Tubular MES
"Filament lamps will perform to specification and give optimum life when:
a) They are powered at the rated voltage from a stabilised 50 Hz AC supply.
b) Ambient temperature is in the range 20°C to 25°C.
c) No mechanical vibration is present.
Deviations from these criteria have a significant effect on lamp life, particularly with low current filaments (<80mA).
Power from a DC supply at the rated voltage can reduce the listed life by up to 50%.
The effect of deviation from the rated operating voltage should be noted:
5% above will reduce lamp life by up to 50%.
5% below will significantly increase lamp life.
Power consumption may vary up to ±10% compared to the listed values at the rated supply voltage. Therefore, particular care should be taken when a number of lamps are connected in series. In such applications it is recommended that the rated voltage be reduced by 10% to prevent premature failure of individual lamps."
Filament lamps will perform to specification and give optimum life when: they are powered at the rated voltage from a stabilised 50Hz ac supply; the ambient temperature is in the range +20°C to +25°C; and where no mechanical vibration is present.
Deviations from these criteria can have a significant effect on lamp life, particularly with low current filaments (<80mA).
Operation from a DC supply at rated voltage can reduce specified life by up to 50%. The effect of variation from the rated operating voltage should be noted: 5% above will reduce lamp life by up to 50%. 5% below will significantly increase lamp life. Current consumption can vary by up to ±10% on stated values at rated supply voltage. Care should therefore be exercised when running a number of lamps in series. In such applications it is recommended that the rated voltage be reduced by 10% to prevent premature failure of individual lamps.
Conversion of light output units: Lumens = MSCP x 12.6, MSCP = Lumens / 12.6.
Informácie o zásobách sú dočasne nedostupné.
€ 16,25
€ 1,625 Each (In a Pack of 10) (bez DPH)
10
€ 16,25
€ 1,625 Each (In a Pack of 10) (bez DPH)
Informácie o zásobách sú dočasne nedostupné.
10
| Množstvo | Jednotková cena | Balík |
|---|---|---|
| 10 - 90 | € 1,625 | € 16,25 |
| 100 - 490 | € 1,462 | € 14,62 |
| 500 - 990 | € 1,218 | € 12,18 |
| 1000 - 2490 | € 1,137 | € 11,37 |
| 2500+ | € 1,039 | € 10,39 |
Technické Dokumenty
Špecifikácie
Brand
RS ProTyp produktu
Indicator Light
Napětí
130V
Podtyp
Indicator Lamp
Základna/zásuvka žárovky
E10
Proud
20mA
Durchmesser
10mm
Länge
28mm
Barva čočky
Clear
Označení žárovky
T3 1/4
Světelný výkon
3 lm
Životnost
3000h
Normy/schválení
RoHS
Krajina pôvodu
Korea, Republic Of
Podrobnosti o výrobku
T-3¼ (10mm) Tubular MES
"Filament lamps will perform to specification and give optimum life when:
a) They are powered at the rated voltage from a stabilised 50 Hz AC supply.
b) Ambient temperature is in the range 20°C to 25°C.
c) No mechanical vibration is present.
Deviations from these criteria have a significant effect on lamp life, particularly with low current filaments (<80mA).
Power from a DC supply at the rated voltage can reduce the listed life by up to 50%.
The effect of deviation from the rated operating voltage should be noted:
5% above will reduce lamp life by up to 50%.
5% below will significantly increase lamp life.
Power consumption may vary up to ±10% compared to the listed values at the rated supply voltage. Therefore, particular care should be taken when a number of lamps are connected in series. In such applications it is recommended that the rated voltage be reduced by 10% to prevent premature failure of individual lamps."
Filament lamps will perform to specification and give optimum life when: they are powered at the rated voltage from a stabilised 50Hz ac supply; the ambient temperature is in the range +20°C to +25°C; and where no mechanical vibration is present.
Deviations from these criteria can have a significant effect on lamp life, particularly with low current filaments (<80mA).
Operation from a DC supply at rated voltage can reduce specified life by up to 50%. The effect of variation from the rated operating voltage should be noted: 5% above will reduce lamp life by up to 50%. 5% below will significantly increase lamp life. Current consumption can vary by up to ±10% on stated values at rated supply voltage. Care should therefore be exercised when running a number of lamps in series. In such applications it is recommended that the rated voltage be reduced by 10% to prevent premature failure of individual lamps.
Conversion of light output units: Lumens = MSCP x 12.6, MSCP = Lumens / 12.6.