Technické Dokumenty
Špecifikácie
Brand
RS ProKonfigurace kontaktů
Single Pole Double Throw (SPDT)
Ovládání spínače
On-On
Jmenovitý kontaktní proud
3 A při 28 V DC
Montage-Typ
Panel Mount
Typ svorky
Solder
Délka ovládacího prvku
9.4mm
Materiál ovládacího prvku
Brass
Materiál kontaktu
Postříbřené mincovní stříbro
Kontaktní odpor
0.02Ω
Minimální provozní teplota
-30°C
Rozsah pracovních teplot
-30 → +85°C
Maximální provozní teplota
+85°C
Splněné normy
UL Listed
Podrobnosti o výrobku
This toggle switch from RS PRO is used in numerous applications to switch between two circuits. As a single pole, double throw (SPDT) switch performing on-on operation, it allows only one of the two circuits it controls to be energised at any one time.
The panel-mount switch has terminals sealed with epoxy to prevent contamination during soldering. Its silver contacts offer the highest conductivity while the chrome-plated brass actuator will deliver an extended service life. The switch is housed in a diallyl phthalate case with excellent insulation properties. It will operate down to a minimum temperature of -30˚C and up to a maximum of +85˚C.
The switch conforms to North American UL standards as a safe and effective component.
Also known as a changeover switch, an SPDT switch could be used for example to switch on a red lamp in one position and a green lamp in the other.
RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards
theyre only given the RS PRO Seal of Approval if were confident of their exceptional quality, which means you can be confident too.
Informácie o zásobách sú dočasne nedostupné.
P.O.A.
1
P.O.A.
Informácie o zásobách sú dočasne nedostupné.
1
Technické Dokumenty
Špecifikácie
Brand
RS ProKonfigurace kontaktů
Single Pole Double Throw (SPDT)
Ovládání spínače
On-On
Jmenovitý kontaktní proud
3 A při 28 V DC
Montage-Typ
Panel Mount
Typ svorky
Solder
Délka ovládacího prvku
9.4mm
Materiál ovládacího prvku
Brass
Materiál kontaktu
Postříbřené mincovní stříbro
Kontaktní odpor
0.02Ω
Minimální provozní teplota
-30°C
Rozsah pracovních teplot
-30 → +85°C
Maximální provozní teplota
+85°C
Splněné normy
UL Listed
Podrobnosti o výrobku
This toggle switch from RS PRO is used in numerous applications to switch between two circuits. As a single pole, double throw (SPDT) switch performing on-on operation, it allows only one of the two circuits it controls to be energised at any one time.
The panel-mount switch has terminals sealed with epoxy to prevent contamination during soldering. Its silver contacts offer the highest conductivity while the chrome-plated brass actuator will deliver an extended service life. The switch is housed in a diallyl phthalate case with excellent insulation properties. It will operate down to a minimum temperature of -30˚C and up to a maximum of +85˚C.
The switch conforms to North American UL standards as a safe and effective component.
Also known as a changeover switch, an SPDT switch could be used for example to switch on a red lamp in one position and a green lamp in the other.
RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards
theyre only given the RS PRO Seal of Approval if were confident of their exceptional quality, which means you can be confident too.
