Seeit Univerzální programátor Univerzální programátor SUPERPRO-610P, pro použití s: EPROM, PLD, 32bitová paměť MCU,

SUPERPRO 610P, High-Speed Universal Programmer, USB 2.0

The SuperPro-610P is an universal production programmer equipped with ARM9 processor with a USB 2.0 interface. Based on the 48-pin ZIF socket it can program over 32000 differents components among EPROMs, EEPROMs, FLASHs memories, PLDs and microcontrollers. It can program low voltage components down to 1.2V. It doesn’t need any adapters for any SDIP packages. The programming is extremely fast based on the use of algorithm technology downloaded in the CPU of the programmer during the selection of a device. An optional ISP adapter permit to program components soldered on printed circuits or devices in special packages. The software runs under Windows 98/ME/NT/2000/XP/Windows7/Windows8 (32/64 bits). Updates can be download freely.

• Supported devices: EPROM, Paged EPROM, Parallel and Serial EEPROM, FPGA Configuration PROM, FLASH memory (NOR & NAND), BPROM, NVRAM, SPLD, CPLD, EPLD, Firmware HUB, Microcontroller
• Packages supported: DIP, SDIP, PLCC, JLCC, SOIC, QFP, TQFP, PQFP, VQFP, TSOP, SOP, TSOPII, PSOP, TSSOP, SON, EBGA, FBGA, VFBGA, uBGA, CSP, SCSP, and more
• Tests and Detects incorrect insertion of the device and defective pin
• protected against short circuits and over-voltages
• Computer interface with USB 2.0
• AC Power Adapter: AC input 90V to 250V, 50/60Hz, DC output 12V/2A; power: 15W
• Dimensions: 178 x 130 x 40 mm, Weight: 0.8kg

Kit Contents

• Programmer with 48-pins ZIF socket
• Power Adaptor 90-260Vac to 12Vdc
• USB-B to USB-A cable
• Software on CD-ROM
• User manual in English and French

PC Based Programmers