STMicroelectronics Snímač teploty a vlhkosti, řada: MCP9701T Digitální Povrch ±2.5 %, SMBus, Snímač teploty, počet

Name: STMicroelectronics Snímač teploty a vlhkosti, řada: MCP9701T Digitální Povrch ±2.5 %, SMBus, Snímač teploty, počet
Brand: STMicroelectronics
SKU: 1908454
Availability: LimitedAvailability

Skladové číslo RS: 190-8454Značka: STMicroelectronicsČíslo dielu výrobcu: STTS751-1DP3F

Zobraziť všetko v kategorii IO snímačů teploty a vlhkosti

Technické Dokumenty

Špecifikácie

Brand

STMicroelectronics

Typ produktu

Temperature & Humidity Sensor

Typ výstupu

Digital

Podtyp

Temperature Sensor

Typ rozhraní

SMBus

Přesnost

±2.5 %

Typ montáže

Surface

Počet kolíků

Maximální provozní teplota

125°C

Minimální provozní teplota

-40°C

Minimální napájecí napětí

2.25V

Maximální napájecí napětí

3.6V

Gehäusegröße

UDFN

Délka

2.05mm

Výška

0.5mm

Normy/schválení

NACE MR0175, ASME B16.34, API 607, ISO 5211

Řada

MCP9701T

Automobilový standard

Podrobnosti o výrobku

The STTS751 is a digital temperature sensor which communicates over a 2-wire SMBus 2.0 compatible bus. The temperature is measured with a user-configurable resolution between 9 and 12 bits. At 9 bits, the smallest step size is 0.5 °C, and at 12 bits, it is 0.0625 °C. At the default resolution (10 bits, 0.25 °C/LSB), the conversion time is nominally 21 milliseconds.
The open-drain EVENT output is used to indicate an alarm condition in which the measured temperature has exceeded the user-programmed high limit or fallen below the low limit. When the EVENT pin is asserted, the host can respond using the SMBus Alert Response Address (ARA) protocol to which the STTS751 will respond by sending its slave address.
The STTS751 is a 6-pin device that supports user-configurable slave addresses. Via the pull-up resistor on the Addr/Therm pin, one of four different slave addresses can be specified. Two order numbers (STTS751-0 and STTS751-1) provide two different sets of slave addresses bringing the total available to eight. Thus, up to eight devices can share the same 2-wire SMBus without ambiguity, thereby allowing monitoring of multiple temperature zones in an application.
The two-wire interface can support transfer rates up to 400 kHz.

Ideate. Create. Collaborate

JOIN FOR FREE

No hidden fees!

Download and use our DesignSpark software for your PCB and 3D Mechanical designs
View and contribute website content and forums
Download 3D Models, Schematics and Footprints from more than a million products

Click here to find out more

Zobraziť všetko v kategorii IO snímačů teploty a vlhkosti

Informácie o zásobách sú dočasne nedostupné.

€ 1 789,90

€ 0,597 Each (On a Reel of 3000) (bez DPH)

STMicroelectronics Snímač teploty a vlhkosti, řada: MCP9701T Digitální Povrch ±2.5 %, SMBus, Snímač teploty, počet

€ 1 789,90

€ 0,597 Each (On a Reel of 3000) (bez DPH)

STMicroelectronics Snímač teploty a vlhkosti, řada: MCP9701T Digitální Povrch ±2.5 %, SMBus, Snímač teploty, počet

Informácie o zásobách sú dočasne nedostupné.

Ideate. Create. Collaborate

JOIN FOR FREE

No hidden fees!

Download and use our DesignSpark software for your PCB and 3D Mechanical designs
View and contribute website content and forums
Download 3D Models, Schematics and Footprints from more than a million products

Click here to find out more

Technické Dokumenty

Špecifikácie

Brand

STMicroelectronics

Typ produktu

Temperature & Humidity Sensor

Typ výstupu

Digital

Podtyp

Temperature Sensor

Typ rozhraní

SMBus

Přesnost

±2.5 %

Typ montáže

Surface

Počet kolíků

Maximální provozní teplota

125°C

Minimální provozní teplota

-40°C

Minimální napájecí napětí

2.25V

Maximální napájecí napětí

3.6V

Gehäusegröße

UDFN

Délka

2.05mm

Výška

0.5mm

Normy/schválení

NACE MR0175, ASME B16.34, API 607, ISO 5211

Řada

MCP9701T

Automobilový standard

Podrobnosti o výrobku

The STTS751 is a digital temperature sensor which communicates over a 2-wire SMBus 2.0 compatible bus. The temperature is measured with a user-configurable resolution between 9 and 12 bits. At 9 bits, the smallest step size is 0.5 °C, and at 12 bits, it is 0.0625 °C. At the default resolution (10 bits, 0.25 °C/LSB), the conversion time is nominally 21 milliseconds.
The open-drain EVENT output is used to indicate an alarm condition in which the measured temperature has exceeded the user-programmed high limit or fallen below the low limit. When the EVENT pin is asserted, the host can respond using the SMBus Alert Response Address (ARA) protocol to which the STTS751 will respond by sending its slave address.
The STTS751 is a 6-pin device that supports user-configurable slave addresses. Via the pull-up resistor on the Addr/Therm pin, one of four different slave addresses can be specified. Two order numbers (STTS751-0 and STTS751-1) provide two different sets of slave addresses bringing the total available to eight. Thus, up to eight devices can share the same 2-wire SMBus without ambiguity, thereby allowing monitoring of multiple temperature zones in an application.
The two-wire interface can support transfer rates up to 400 kHz.

Ideate. Create. Collaborate

JOIN FOR FREE

No hidden fees!

Download and use our DesignSpark software for your PCB and 3D Mechanical designs
View and contribute website content and forums
Download 3D Models, Schematics and Footprints from more than a million products

Click here to find out more