Technické Dokumenty
Špecifikácie
Brand
STMicroelectronicsTyp produktu
Vývojová sada pro řízení napájení
Funkce řízení napájení
Power Management
Pro použití s
Synchronní Snižovací Regulátor Pwm
Klasifikace sady
Evaluation Board
Doporučené zařízení
ST1S40
Název sady
Demonstration Board
Normy/schválení
RoHS
Krajina pôvodu
Italy
Podrobnosti o výrobku
The STEVAL-ISA084V1, based on the ST1S40, is an internally compensated 800 kHz fixed-frequency PWM synchronous step-down converter demonstration board. The ST1S40 operates from 4.0 V to 18 V input, while it regulates an output voltage as low as 0.8 V and up to VIN (100% duty-cycle). The ST1S40 integrates 95 mΩ high side switch and 69 mΩ synchronous rectifier allowing very high efficiency with very low output voltages. The peak current mode control with internal compensation delivers a very compact solution with a minimum component count. The device is protected through cycle-by-cycle current limiting in case of overload and is also protected by current foldback function with frequency reduction in case of short-circuit The device is available with an enable on/off function.
Informácie o zásobách sú dočasne nedostupné.
€ 29,28
€ 29,28 Each (bez DPH)
1
€ 29,28
€ 29,28 Each (bez DPH)
Informácie o zásobách sú dočasne nedostupné.
1
Technické Dokumenty
Špecifikácie
Brand
STMicroelectronicsTyp produktu
Vývojová sada pro řízení napájení
Funkce řízení napájení
Power Management
Pro použití s
Synchronní Snižovací Regulátor Pwm
Klasifikace sady
Evaluation Board
Doporučené zařízení
ST1S40
Název sady
Demonstration Board
Normy/schválení
RoHS
Krajina pôvodu
Italy
Podrobnosti o výrobku
The STEVAL-ISA084V1, based on the ST1S40, is an internally compensated 800 kHz fixed-frequency PWM synchronous step-down converter demonstration board. The ST1S40 operates from 4.0 V to 18 V input, while it regulates an output voltage as low as 0.8 V and up to VIN (100% duty-cycle). The ST1S40 integrates 95 mΩ high side switch and 69 mΩ synchronous rectifier allowing very high efficiency with very low output voltages. The peak current mode control with internal compensation delivers a very compact solution with a minimum component count. The device is protected through cycle-by-cycle current limiting in case of overload and is also protected by current foldback function with frequency reduction in case of short-circuit The device is available with an enable on/off function.